下面就是小编给大家整理的专业能源人才求挑战性工作英文简历（共含9篇），希望您能喜欢！同时，但愿您也能像本文投稿人“迦梨”一样，积极向本站投稿分享好文章。
专业能源人才求挑战性工作英文简历
SUMMARY OF QUALIFICATIONS:Structural design and construction of nuclear facilities at DOE Los Alamos National Laboratory.
Analysis and design of special equipment and facilities for recovery of spent nuclear fuel elements at DOE Hanford Site.
Structural design of Pit 9 recovery building for DOE Idaho National Engineering & Environmental Laboratory.
Structural/seismic design of diesel generator building for upgrade of process canyons at DOE Savannah River Site.
Experienced and knowledgeable of code requirements and standards for steel, concrete and masonry structures.
OBJECTIVE:
Practice as a professional engineer with an organization that offers challenging projects to work on, provides a climate of fairness for employees and pays a fair wage.
WORK EXPERIENCE:
For each of the following assignments I served as the licensed Engineer of Record.
Neutron Tube Target Loading Project, Los Alamos National Laboratory, 1995-
Designed and supervised design and drafting for new tritium facility including reinforced masonry shear wall building, modification and upgrade of an existing reinforced concrete building and foundation for a new steel building.
Conducted seismic lateral load analysis for entire facility.
Wrote design criteria and prepared construction specifications and drawings.
Developed structural test and inspection plans and integrated structural design with electrical, mechanical and architectural disciplines.
Reviewed and approved vendor submittals, managed construction documents, supported change control process and prepared as-built project records.
专业能源人才求挑战性工作英文简历
SUMMARY OF QUALIFICATIONS:Structural design and construction of nuclear facilities at DOE Los Alamos National Laboratory.
Analysis and design of special equipment and facilities for recovery of spent nuclear fuel elements at DOE Hanford Site.
Structural design of Pit 9 recovery building for DOE Idaho National Engineering & Environmental Laboratory.
Structural/seismic design of diesel generator building for upgrade of process canyons at DOE Savannah River Site.
Experienced and knowledgeable of code requirements and standards for steel, concrete and masonry structures.
OBJECTIVE:
Practice as a professional engineer with an organization that offers challenging projects to work on, provides a climate of fairness for employees and pays a fair wage.
WORK EXPERIENCE:
For each of the following assignments I served as the licensed Engineer of Record.
Neutron Tube Target Loading Project, Los Alamos National Laboratory, 1995-1997
Designed and supervised design and drafting for new tritium facility including reinforced masonry shear wall building, modification and upgrade of an existing reinforced concrete building and foundation for a new steel building.
Conducted seismic lateral load analysis for entire facility.
Wrote design criteria and prepared construction specifications and drawings.
Developed structural test and inspection plans and integrated structural design with electrical, mechanical and architectural disciplines.
Reviewed and approved vendor submittals, managed construction documents, supported change control process and prepared as-built project records.
K-Basin Spent Nuclear Fuel Project, Hanford Site, 1997-
Conducted structural analysis and design for the Cold Vacuum Drying System and the Hot Conditioning Faci
lity.Conducted seismic analysis of the 25 ton Hot Conditioning System process steel enclosure.
Pit 9 Remediation Project, Idaho National Engineering & Environmental Laboratory Site, -1997
Designed a large retrofit penetration in an existing concrete partition wall in the facility.
Performed seismic dynamic analysis to demonstrate concept feasibility. Prepared detailed engineering sketches for input to drafting construction drawings.
Conducted structural analysis and design of steel frame and concrete deck mezzanine floor for the shredder/separator cell.
Designed and supervised drafting of main steel construction drawings for the Pit 9 retrieval building. This unique structure spans Pit 9 and moves along skid beams on Hillman rollers. An open bottom provides access for waste retrieval equipment in the building.
Canyons Upgrade Project, Savannah River Site, 1997-1998
Developed structural design criteria, building structural concept and supervised static/seismic analysis, design and drafting for construction drawings for the reinforced concrete shear wall building housing the diesel/electric generator power system.
Typical Project Support Experience at Los Alamos National Laboratory, 1998-
Conducted seismic analysis of the nitric acid tank farm expansion for Building PF-4 in
TA-55. Designed structure for tanks and piping support and anchorage.
Performed evaluation of Building TA-53-0006 (3-story reinforced masonry office building) and Building TA-21-1001 (unreinforced masonry one-story records storage warehouse) to requirements of FEMA-178. Recommended seismic upgrades for both structures and designed roof support repair for the records storage warehouse.
Conducted conceptual and detailed design of a Weapons Engineering Tritium Facility upgrade for rack storage of tritium canisters in Building TA-16-205A, including fabrication drawings and specification, and se
ismic analysis of the combined storage racks and existing on-grade reinforced concrete floor slab.Designed a high-seismic performance storage vault for the Beryllium Technology Facility including seismic analysis, drilled pier foundation, reinforced masonry shear walls and light concrete filled steel deck roof.
EDUCATION & CERTIFICATION:
BSME Northwestern University GPA 3.8/4.0 Tau Beta Pi, Pi Tau Sigma
MS Structural Engineering Purdue University GPA 6.0/6.0 Sigma Xi
Ph.D. Aeronautics/Astronautics Stanford University
MS Deep Foundations University of Houston 4.0/4.0
MSNE Nuclear Engineering University of New Mexico 3.83/4.0
Professional Engineer licenses:NM, CO, UT, OK, TN, TX
Structural Engineer licenses:CA, WA, ID, NV
Nuclear Engineer license:NM
All licenses are current.
My File #4591 National Council of Examiners for Engineers and Surveyors makes it possible to become licensed in any other of the lower forty-eight states within two months.
Life Member, American Society of Civil Engineers
Member, American Nuclear Society
ADDITIONAL INFORMATION:
Citizen of the U.S.A.
Hold an active DOE L security clearance.
In excellent health and not overweight.
Congenial personality, considerate and thoughtful of my fellow employees and respectful of my boss.
Have a reputation for completing my assignments on schedule, within my agreed budget and to standards of professional excellence expected of a licensed structural engineer.
I am proficient with the RISA 3D structural analysis code and Windows Office suite. I type my own engineering reports and criteria documents and usually include hand calculations.
Active voluntary participant with the other structural engineers in Los Alamos in developing engineering standards for design and construction of nuclear facilities at the Laboratory.
Enjoy fishing and ta
king vacation trips with my wife.I am now and have been continuously employed by the same A/E company since coming to Los Alamos in 1995.
REFERENCES:
Available upon request
相关专题：尚无数据专业能源人才求挑战性工作英文的简历
SUMMARY OF QUALIFICATIONS:
Structural design and construction of nuclear facilities at DOE Los Alamos National Laboratory.
Analysis and design of special equipment and facilities for recovery of spent nuclear fuel elements at DOE Hanford Site.
Structural design of Pit 9 recovery building for DOE Idaho National Engineering & Environmental Laboratory.
Structural/seismic design of diesel generator building for upgrade of process canyons at DOE Savannah River Site.
Experienced and knowledgeable of code requirements and standards for steel, concrete and masonry structures.
OBJECTIVE:
Practice as a professional engineer with an organization that offers challenging projects to work on, provides a climate of fairness for employees and pays a fair wage.
WORK EXPERIENCE:
For each of the following assignments I served as the licensed Engineer of Record.
Neutron Tube Target Loading Project, Los Alamos National Laboratory, 1995-
Designed and supervised design and drafting for new tritium facility including reinforced masonry shear wall building, modification and upgrade of an existing reinforced concrete building and foundation for a new steel building.
Conducted seismic lateral load analysis for entire facility.
Wrote design criteria and prepared construction specifications and drawings.
Developed structural test and inspection plans and integrated structural design with electrical, mechanical and architectural disciplines.
Reviewed and approved vendor submittals, managed construction documents, supported change control process and prepared as-built project records.
K-Basin Spent Nuclear Fuel Project, Hanford Site, 1997-1998
Conducted structural analysis and design for the Cold Vacuum Drying System and the Hot Conditioning Facility.
Conducted seismic analysis of the 25 ton Hot Conditioning System process steel enclosure.
Pit 9 Remediation Project, Idaho National Engineering & Environmental Laboratory Site, 1996-1997
Designed a large retrofit penetration in an existing concrete partition wall in the facility.
Performed seismic dynamic analysis to demonstrate concept feasibility. Prepared detailed engineering sketches for input to drafting construction drawings.
Conducted structural analysis and design of steel frame and concrete deck mezzanine floor for the shredder/separator cell.
Designed and supervised drafting of main steel construction drawings for the Pit 9 retrieval building. This unique structure spans Pit 9 and moves along skid beams on Hillman rollers. An open bottom provides access for waste retrieval equipment in the building.
Canyons Upgrade Project, Savannah River Site, 1997-1998
Developed structural design criteria, building structural concept and supervised static/seismic analysis, design and drafting for construction drawings for the reinforced concrete shear wall building housing the diesel/electric generator power system.
Typical Project Support Experience at Los Alamos National Laboratory, 1998-2005
Conducted seismic analysis of the nitric acid tank farm expansion for Building PF-4 in
TA-55. Designed structure for tanks and piping support and anchorage.
Performed evaluation of Building TA-53-0006 (3-story reinforced masonry office building) and Building TA-21-1001 (unreinforced masonry one-story records storage warehouse) to requirements of FEMA-178. Recommended seismic upgrades for both structures and designed roof support repair for the records storage warehouse.
Conducted conceptual and detailed design of a Weapons Engineering Tritium Facility upgrade for rack storage of tritium canisters in Building TA-16-205A, including fabrication drawings and specification, and seismic analysis of the combined storage racks and existing on-grade reinforced concrete floor slab.
Designed a high-seismic performance storage vault for the Beryllium Technology Facility including seismic analysis, drilled pier foundation, reinforced masonry shear walls and light concrete filled steel deck roof.
EDUCATION & CERTIFICATION:
BSME Northwestern University GPA 3.8/4.0 Tau Beta Pi, Pi Tau Sigma
MS Structural Engineering Purdue University GPA 6.0/6.0 Sigma Xi
Ph.D. Aeronautics/Astronautics Stanford
[1] [2] 下一页
UniversityMS Deep Foundations University of Houston 4.0/4.0
MSNE Nuclear Engineering University of New Mexico 3.83/4.0
Professional Engineer licenses: NM, CO, UT, OK, TN, TX
Structural Engineer licenses: CA, WA, ID, NV
Nuclear Engineer license: NM
All licenses are current.
My File #4591 National Council of Examiners for Engineers and Surveyors makes it possible to become licensed in any other of the lower forty-eight states within two months.
Life Member, American Society of Civil Engineers
Member, American Nuclear Society
ADDITIONAL INFORMATION:
Citizen of the U.S.A.
Hold an active DOE L security clearance.
In excellent health and not overweight.
Congenial personality, considerate and thoughtful of my fellow employees and respectful of my boss.
Have a reputation for completing my assignments on schedule, within my agreed budget and to standards of professional excellence expected of a licensed structural engineer.
I am proficient with the RISA 3D structural analysis code and Windows Office suite. I type my own engineering reports and criteria documents and usually include hand calculations.
Active voluntary participant with the other structural engineers in Los Alamos in developing engineering standards for design and construction of nuclear facilities at the Laboratory.
Enjoy fishing and taking vacation trips with my wife.
I am now and have been continuously employed by the same A/E company since coming to Los Alamos in 1995.
REFERENCES:
Available upon request
上一页 [1] [2]
能源专业求职英文简历模板
SUMMARY OF QUALIFICATIONS:
Structural design and construction of nuclear facilities at DOE Los Alamos National Laboratory.
Analysis and design of special equipment and facilities for recovery of spent nuclear fuel elements at DOE Hanford Site.
Structural design of Pit 9 recovery building for DOE Idaho National Engineering & Environmental Laboratory.
Structural/seismic design of diesel generator building for upgrade of process canyons at DOE Savannah River Site.
Experienced and knowledgeable of code requirements and standards for steel, concrete and masonry structures.
OBJECTIVE:
Practice as a professional engineer with an organization that offers challenging projects to work on, provides a climate of fairness for employees and pays a fair wage.
WORK EXPERIENCE:
For each of the following assignments I served as the licensed Engineer of Record.
Neutron Tube Target Loading Project, Los Alamos National Laboratory, 1995-1997
Designed and supervised design and drafting for new tritium facility including reinforced masonry shear wall building, modification and upgrade of an existing reinforced concrete building and foundation for a new steel building.
Conducted seismic lateral load analysis for entire facility.
Wrote design criteria and prepared construction specifications and drawings.
Developed structural test and inspection plans and integrated structural design with electrical, mechanical and architectural disciplines.
Reviewed and approved vendor submittals, managed construction documents, supported change control process and prepared as-built project records.
K-Basin Spent Nuclear Fuel Project, Hanford Site, 1997-
Conducted structural analysis and design for the Cold Vacuum Drying System and the Hot Conditioning Facility.
Conducted seismic analysis of the 25 ton Hot Conditioning System process steel enclosure.
Pit 9 Remediation Project, Idaho National Engineering & Environmental Laboratory Site, -1997
Designed a large retrofit penetration in an existing concrete partition wall in the facility.
Performed seismic dynamic analysis to demonstrate concept feasibility. Prepared detailed engineering sketches for input to drafting construction drawings.
Conducted structural analysis and design of steel frame and concrete deck mezzanine floor for the shredder/separator cell.
Designed and supervised drafting of main steel construction drawings for the Pit 9 retrieval building. This unique structure spans Pit 9 and moves along skid beams on Hillman rollers. An open bottom provides access for waste retrieval equipment in the building.
Canyons Upgrade Project, Savannah River Site, 1997-1998
Developed structural design criteria, building structural concept and supervised static/seismic analysis, design and drafting for construction drawings for the reinforced concrete shear wall building housing the diesel/electric generator power system.
Typical Project Support Experience at Los Alamos National Laboratory, 1998-
Conducted seismic analysis of the nitric acid tank farm expansion for Building PF-4 in
TA-55. Designed structure for tanks and piping support and anchorage.
Performed evaluation of Building TA-53-0006 (3-story reinforced masonry office building) and Building TA-21-1001 (unreinforced masonry one-story records storage warehouse) to requirements of FEMA-178. Recommended seismic upgrades for both structures and designed roof support repair for the records storage warehouse.
Conducted conceptual and detailed design of a Weapons Engineering Tritium Facility upgrade for rack storage of tritium canisters in Building TA-16-205A, including fabrication drawings and specification, and seismic analysis of the combined storage racks and existing on-grade reinforced concrete floor slab.
Designed a high-seismic performance storage vault for the Beryllium Technology Facility including seismic analysis, drilled pier foundation, reinforced masonry shear walls and light concrete filled steel deck roof.
EDUCATION & CERTIFICATION:
BSME Northwestern University GPA 3.8/4.0 Tau Beta Pi, Pi Tau Sigma
MS Structural Engineering Purdue University GPA 6.0/6.0 Sigma Xi
Ph.D. Aeronautics/Astronautics Stanford University
MS Deep Foundations University of Houston 4.0/4.0
MSNE Nuclear Engineering University of New Mexico 3.83/4.0
Professional Engineer licenses: NM, CO, UT, OK, TN, TX
Structural Engineer licenses: CA, WA, ID, NV
Nuclear Engineer license: NM
All licenses are current.
My File #4591 National Council of Examiners for Engineers and Surveyors makes it possible to become licensed in any other of the lower forty-eight states within two months.
Life Member, American Society of Civil Engineers
Member, American Nuclear Society
ADDITIONAL INFORMATION:
Citizen of the U.S.A.
Hold an active DOE L security clearance.
In excellent health and not overweight.
Congenial personality, considerate and thoughtful of my fellow employees and respectful of my boss.
Have a reputation for completing my assignments on schedule, within my agreed budget and to standards of professional excellence expected of a licensed structural engineer.
I am proficient with the RISA 3D structural analysis code and Windows Office suite. I type my own engineering reports and criteria documents and usually include hand calculations.
Active voluntary participant with the other structural engineers in Los Alamos in developing engineering standards for design and construction of nuclear facilities at the Laboratory.
Enjoy fishing and taking vacation trips with my wife.
I am now and have been continuously employed by the same A/E company since coming to Los Alamos in 1995.
REFERENCES:
Available upon request
SUMMARY OF QUALIFICATIONS:
Structural design and construction of nuclear facilities at DOE Los Alamos National Laboratory.
Analysis and design of special equipment and facilities for recovery of spent nuclear fuel elements at DOE Hanford Site.
Structural design of Pit 9 recovery building for DOE Idaho National Engineering & Environmental Laboratory.
Structural/seismic design of diesel generator building for upgrade of process canyons at DOE Savannah River Site.
Experienced and knowledgeable of code requirements and standards for steel, concrete and masonry structures.
OBJECTIVE:
Practice as a professional engineer with an organization that offers challenging projects to work on, provides a climate of fairness for employees and pays a fair wage.
WORK EXPERIENCE:
For each of the following assignments I served as the licensed Engineer of Record.
Neutron Tube Target Loading Project, Los Alamos National Laboratory, 1995-
Designed and supervised design and drafting for new tritium facility including reinforced masonry shear wall building, modification and upgrade of an existing reinforced concrete building and foundation for a new steel building.
Conducted seismic lateral load analysis for entire facility.
Wrote design criteria and prepared construction specifications and drawings.
Developed structural test and inspection plans and integrated structural design with electrical, mechanical and architectural disciplines.
Reviewed and approved vendor submittals, managed construction documents, supported change control process and prepared as-built project records.
K-Basin Spent Nuclear Fuel Project, Hanford Site, 1997-1998
Conducted structural analysis and design for the Cold Vacuum Drying System and the Hot Conditioning Facility.
Conducted seismic analysis of the 25 ton Hot Conditioning System process steel enclosure.
Pit 9 Remediation Project, Idaho National Engineering & Environmental Laboratory Site, 1996-1997
Designed a large retrofit penetration in an existing concrete partition wall in the facility.
Performed seismic dynamic analysis to demonstrate concept feasibility. Prepared detailed engineering sketches for input to drafting construction drawings.
Conducted structural analysis and design of steel frame and concrete deck mezzanine floor for the shredder/separator cell.
Designed and supervised drafting of main steel construction drawings for the Pit 9 retrieval building. This unique structure spans Pit 9 and moves along skid beams on Hillman rollers. An open bottom provides access for waste retrieval equipment in the building.
Canyons Upgrade Project, Savannah River Site, 1997-1998
Developed structural design criteria, building structural concept and supervised static/seismic analysis, design and drafting for construction drawings for the reinforced concrete shear wall building housing the diesel/electric generator power system.
Typical Project Support Experience at Los Alamos National Laboratory, 1998-2005
Conducted seismic analysis of the nitric acid tank farm expansion for Building PF-4 in
TA-55. Designed structure for tanks and piping support and anchorage.
Performed evaluation of Building TA-53-0006 (3-story reinforced masonry office building) and Building TA-21-1001 (unreinforced masonry one-story records storage warehouse) to requirements of FEMA-178. Recommended seismic upgrades for both structures and designed roof support repair for the records storage warehouse.
Conducted conceptual and detailed design of a Weapons Engineering Tritium Facility upgrade for rack storage of tritium canisters in Building TA-16-205A, including fabrication drawings and specification, and seismic analysis of the combined storage racks and existing on-grade reinforced concrete floor slab.
Designed a high-seismic performance storage vault for the Beryllium Technology Facility including seismic analysis, drilled pier foundation, reinforced masonry shear walls and light concrete filled steel deck roof.
EDUCATION & CERTIFICATION:
BSME Northwestern University GPA 3.8/4.0 Tau Beta Pi, Pi Tau Sigma
MS Structural Engineering Purdue University GPA 6.0/6.0 Sigma Xi
Ph.D. Aeronautics/Astronautics Stanford University
MS Deep Foundations University of Houston 4.0/4.0
MSNE Nuclear Engineering University of New Mexico 3.83/4.0
Professional Engineer licenses: NM, CO, UT, OK, TN, TX
Structural Engineer licenses: CA, WA, ID, NV
Nuclear Engineer license: NM
All licenses are current.
My File #4591 National Council of Examiners for Engineers and Surveyors makes it possible to become licensed in any other of the lower forty-eight states within two months.
Life Member, American Society of Civil Engineers
Member, American Nuclear Society
ADDITIONAL INFORMATION:
Citizen of the U.S.A.
Hold an active DOE L security clearance.
In excellent health and not overweight.
Congenial personality, considerate and thoughtful of my fellow employees and respectful of my boss.
Have a reputation for completing my assignments on schedule, within my agreed budget and to standards of professional excellence expected of a licensed structural engineer.
I am proficient with the RISA 3D structural analysis code and Windows Office suite. I type my own engineering reports and criteria documents and usually include hand calculations.
Active voluntary participant with the other structural engineers in Los Alamos in developing engineering standards for design and construction of nuclear facilities at the Laboratory.
Enjoy fishing and taking vacation trips with my wife.
I am now and have been continuously employed by the same A/E company since coming to Los Alamos in 1995.
REFERENCES:
Available upon request
英文简历：经验丰富者求广告工作
这是美国人写的`一份求职简历，由于申请人的经历比较丰富，上过大学，毕业后还工作之久，所以有必要写一个概要，使人一看简历对你有一个总的印象。
David Benson
1781 West Ave.
Tarrance, CA 90505
(310)201-3845
Objective: A position in advertising where I can maximize my advertising, supervisory, research, and estimating skills in both print and media.
Summary: Offering over 10 years experience, an A. A degree in Business, and a comprehensive background in all areas of advertising marketing. Ability to thoroughly research, analyze situations, propose creative solutions, develop good rapport, and bring projects to completion under budget deadlines.
Employment History
Print Advertising/Sales Director
United Media, Phoenix, AZ 1994－Present
Responsible to publisher of Equal Opportunity Employment journal for selling and placing advertising in the Recruitment and Education Publication.
● Brought in major new accounts, including American West Airlines and Acme Printing Company.
● Won opportunity to attend California training seminar in telemarketing/sales.
Grey Advertsing, Inc., New York, NY 1988-1994
Media & Print Estimator
Responsible to supervisor for estimates, media placement, and client/agency communications.
● Responsible for over tow million dollars of account estimating.
● Responsible for print and media advertising for Revlon Cosmetics.
Additonal Information
Education: Associate Arts degree, El Camino Collge, Los Angeles, CA.
Continuing Education: Accounting, UCLA
Affiliations: Society of Sales Professionals
美国高中生求假期兼职工作英文简历
美国的孩子从很小的.时候就开始学习独立生活，很多时候他们的零花钱都是自己做工挣的，本文则是一个美国高中生寻求假期兼职工作的简历，相信对那些找兼职工作的人也有很大的借鉴作用
JOB WANTED
Part-time after school and weekend job：
Stockroom helper ／Grocery bagger
Golf Caddie ／Dishwasher
Theater maintenance helper ／Arcade guide
－Reliable. Willing and able to show up on time.
－Honest and trustworthy.
－Good attitude around others. Willing to help, patient with people, do my share, willing to learn.
PAID WORK EXPERIENCE
- Handyman
Worked on Nutley rental property owned by my relatives
－Replaced broken wood fence.
－Painted inside and outside walls.
－Cleared out trash left by tenants.
Fall Babysitter
－Do on-call work for parent during football games.
2005-2006 Bagger after school, weekends, vacations
－Bagged groceries at US Army Commissary, Hamburg, Germany
2005 Woodworker and Salesman part-time during school year
Produced wood handicrafts; sold them to teachers and other students.
－ Increased sales by giving customers a chance to try out the merchandise and show it to others.
－Increased income by raising prices on popular items.
－Used woodworking tools to make handicrafts.
Golf Caddie
Caddied every day during summer vacation.
Work Experience in School
Animal Care Project, Nov. 2004 to Apr. 2005
Successfully raised a pig to sell at the County Fair.
－Won three blue ribbons. Earned over $200.
－Fed pig every day, cleaned the pen, gave the animal shots when it was sick, checked its weight weekly.
Free Enterprise Class, (Junior High)
－Sold sc
英文简历：10年经验者求出纳工作
这是一个拥有近10年工作经验的求职者寻找出纳职位，简历中，求职者突出了自己的行业经历，还强调了自己的专业技能。 Personal Information
Name: Xiuying Shi
Sex: Female
Birthday: January 26, 1973
Marital Status: Married
Tel: (0574)XXXXXXX
Object: To be employed as cashier in a large retail store, preferably in Hangzhou.
Employment
2004－Present
Cashier at checkout counter of Ningbo Supermarket.
－2003
Assistant bookkeeper, Ningbo Department Store. Prepared monthly statements and assisted bookkeeper in all record-keeping.
－
Cash Receivable Clerk, at a Seven and Eleven store. Received cash, issued invoices to customers, and recorded cash accounts.
Education
1993－1997 Hangzhou School of Finance and Trade, majored in cash receiving, bookkeeping and accounting.
1987－1993 Ningbo No. 6 Middle School.
Certificates
1. Computer Operation Certificate.
2. Grade Five Certificate of Abacus Computation.
References
Furnished upon request
新的一批高考生已经开始备战高考了，而高考生不仅要好好准备高考，挑选专业也是最为关键的一件事，选择一个好的专业可能让你受益终生，选择一个不好的专业可能毕业就已经失业了，下面给大家带来“未来10年”人才缺口大的4个专业，毕业就很吃香，找工作不用愁!
一、人工智能
人工智能专业在近几年突然兴起，当下这个专业十分火热，而且现如今人工智能已经实际应用到我们生活的各个角落。目前这个专业的人才缺口比较大，毕竟我国起步比较晚，不过相信在未来十年里，这个专业肯定很吃香，同时此行业也需要招聘一大批相关专业的人才，毕业就很吃香，找工作更是不用愁。
二、微电子科学与工程
微电子科学与工程这个专业可能大家不太熟悉，其实这是一个专业主要研究半导体，毕业只要主要从事硬件行业。不过大家可能会觉得软件行业的待遇比硬件行业好太多了，以至于选择这个专业的学生比较少，导致此专业的人才比较缺乏，所以这个专业的就业市场缺口大，人才需求量也高，从长远的眼光来看，这个行业未来的发展还是很有潜力的。
三、精算学
精算是一门运用概率数学理论和多种金融工具对经济活动进行分析预测的学问。精算学在西方已经有三百年的历史，但是几年前在国内这个专业却一直不温不火。而如今，精算师已经作为一种职业悄然步入我国的经济生活，说明这个专业还是很有前途的。
目前国内的精算师比较缺乏，相信在未来几年里，这个行业也很吃香，薪资待遇更是不用说，在保险公司中，精算师是核心部门的核心人才，有着极高的地位、权力和职责，这也就说明了精算师的工资是不会低的。
四、学前教育
现在师范专业也是一个热门专业，很多师范毕业生毕业之后就会去当老师，现如今老师依然是一个铁饭碗，虽然辛苦了一点，但是各方面待遇还是不错的。学前教育也是同样的道理，随着学前教育的普及，学校对幼师的需求量也越来越大。
再加上从事幼师的相关人才整体学历都不高，而本科的学前教育学生就业很有优势，毕业就很吃香，相信未来学前教育也会受到重视，老师的待遇也会越来越好。
本文编辑：小明
(本文图片来源网络，侵联删)
★ 模具专业英文简历
★ 机电专业英文简历
★ 体育专业英文简历
★ 人才工作主持词
