下面就是小编给大家带来的工业工程师英文自我介绍（共含12篇），希望大家喜欢，可以帮助到有需要的朋友!同时，但愿您也能像本文投稿人“江湖呆子”一样，积极向本站投稿分享好文章。
工业工程师英文自我介绍
I would like to apply for the post of industrial engineer, which your company offered. I feel that I am the right sort of person for the post because my qualifications and experience are really suitable for the position.
I expect to graduate in July from the Department of Industrial Engineering of unjs University of Science and Technology, majoring in industrial engineering.
During my college years, I have worked very hard at my major courses, so as to lay a solid foundation of theoretical knowledge. As a result, I have passed all the examinations and achieved excellent academic results in major courses such as statistics, operation researches, system engineering, business management, logistics, Statistics and Probability Theory ，Professional English, Metalworking Practice, Electrical Engineering Practice, Linear Algebra. Moreover I have passed CET-4 and National Computer Level Test-Rank Three.
Outside classroom, I was very active and took part in different social activities. In my junior year, I served as monitor of my class, and received Advanced Person of Jiangxi University of Science and Technology. Since September , I worked as a part-time business controller at Angel of Ganzhou, and raised our products’ share by 48.28 percent by . In addition, I worked rather actively and successfully in certain student’s societies. All those experiences contributed much to the development and promotion of my organizing and social abilities.
I wish to assure you that, if successful, I would endeavor to give you every satisfaction. It would be greatly appreciated if you grant me an opportunity of an interview. At that time, I will present my credentials. I can be reached by phone at XXXXX or email me at unjs@unjs.com
Enclosed please find a resume, a copy of the recommendation form and the official transcript, Thank you for your time and consideration.
industrial engineer
sandy lin 15/f,tower2 ,bright china,building1,beijing.
professional experience
XX-present leyner corporation,lake charles,la
industrial engineer
provide floor support engineering in printed wire assembly (pwa) and subsystem assembly (ssa) areas.
purchase capital equipment.interface with vendors. justify expenditures.
design plant layout fixtures,and flow charts of material.
program automatic equipment.
write process sheets and rework procedures.
recommend changes to product to allow ease of manufacture.
implement design changes.inititate methods and process improvements.
troubleshoot problems.effect disposition or rejection of material.
provide assistance to all other departments.
XX prudence d. mcharrison laboratory,ruston,la
engineering assistant
conducted variety of tests including tensile.compression,and creep tests on molded parts.
responsible for production of plastic test specimens,and mounting polishing,and microscopic analysis.
designed tools and fixtures for instron machine.
XX/XX duchess components,baton rouge,la
molding room attendant,XX
operated and maintained machine producing epoxy preforms.
maintained records on inventory,loss of material,and quality control.
machine shop attendant,XX
operated lathes,milling and grinding machines;monitored welding and heat treatments.
read blueprints.
education
loyola university at new orleans,college of engineering,new orleans,la
bachelor of science degree in industrial technology,1985
minor concentration in computer science.
professional affiliations/certifications
member,society of manufacturing engineers,leaner management club certified manufacturing technologist and solderer.
notice
relevant work experience is emphasized while other positions are de-emphasized.
chronological format illustrates a clear career path.
附： 一、羞于列出自己的成就
成功是属于那些懂得行销自己的人。要旗开得胜，首先必得学会推销自己。但勇于列出自己的成就之时，别忘了也要注意勿用夸大不实的陈述，免得引起企业主的反感。
二、列举太多不相关的信息
写求职信函的最初及最终目的在于推销自己，因此一些个人的大学求学过程、兴趣以及个人的观点等，这些都可以在面谈时简述提出。因为列举太多的信息，可能会模糊本身的求职的焦点，分散雇主的注意力。
三、重复太多
不要一再地重复一些形容词 ，这样会让人觉得赘词太多，而且看了会精疲力尽。专家建议，最好同一个词汇用到第二次时，找新的表达语汇。
四、在信中一再提及介绍人
不管你应征什么职务，只要找得到介绍人，你的介绍人都会为你大力推荐。因此并不需要特别在信中一再提及介绍人。除非雇主主动要求，自然会请你提出介绍人的资料。
工业工程师英文个人简历
INDUSTRIAL ENGINEERSandy Lin 15/F,TOWER2 ,BRIGHT CHINA,BUILDING1,BEIJING.
PROFESSIONAL EXPERIENCE
1985-Present LEYNER CORPORATION,Lake Charles,LA
Industrial Engineer
Provide floor support engineering in printed wire assembly （PWA） and subsystem assembly （SSA） areas.
Purchase capital equipment.Interface with vendors. Justify expenditures.
Design plant layout fixtures,and flow charts of material.
Program automatic equipment.
Write process sheets and rework procedures.
Recommend changes to product to allow ease of manufacture.
Implement design changes.Inititate methods and process improvements.
Troubleshoot problems.Effect disposition or rejection of material.
Provide assistance to all other departments.
1984 PRUDENCE D. MCHARRISON LABORATORY,Ruston,LA
Engineering Assistant
Conducted variety of tests including Tensile.Compression,and creep tests on molded parts.
Responsible for production of plastic test specimens,and mounting polishing,and microscopic analysis.
Designed tools and fixtures for Instron machine.
1982/83 DUCHESS COMPONENTS,Baton Rouge,LA
Molding Room Attendant,1983
Operated and maintained machine producing epoxy preforms.
Maintained records on inventory,loss of material,and quality control.
Machine shop attendant,1982
Operated lathes,milling and grinding machines;monitored welding and heat treatments.
Read blueprints.
EDUCATION
LOYOLA UNIVERSITY AT NEW ORLEANS,College of Engineering,New Orleans,LA
Bachelor of Science Degree in Industrial Technology,1985
Minor concentration in computer science.
PROFESSIONAL AFFILIATIONS/CERTIFICATIONS
Member,Society of Manufacturing Engineers,Leaner Management Club Certified Manufacturing Technologist and Solderer.
工业工程师简历英文模板
1985-present leyner corporation,lake charles,la
industrial engineer
provide floor support engineering in printed wire assembly (pwa) and subsystem assembly (ssa) areas.
purchase capital equipment.interface with vendors. justify expenditures.
design plant layout fixtures,and flow charts of material.
program automatic equipment.
write process sheets and rework procedures.
recommend changes to product to allow ease of manufacture.
implement design changes.inititate methods and process improvements.
troubleshoot problems.effect disposition or rejection of material.
provide assistance to all other departments.
1984 prudence d. mcharrison laboratory,ruston,la
engineering assistant
conducted variety of tests including tensile.compression,and creep tests on molded parts.
responsible for production of plastic test specimens,and mounting polishing,and microscopic analysis.
designed tools and fixtures for instron machine.
1982/83 duchess components,baton rouge,la
molding room attendant,1983
operated and maintained machine producing epoxy preforms.
maintained records on inventory,loss of material,and quality control.
machine shop attendant,1982
operated lathes,milling and grinding machines;monitored welding and heat treatments.
read blueprints.
education
loyola university at new orleans,college of engineering,new orleans,la
bachelor of science degree in industrial technology,1985
minor concentration in computer science.
professional affiliations/certifications
member,society of manufacturing engineers,leaner management club certified manufacturing technologist and solderer.
notice
relevant work experience is emphasized while other positions are de-emphasized.
chronological format illustrates a clear career path.
工业工程师英文个人简历模板
INDUSTRIAL ENGINEER
Sandy Lin15/F,TOWER2,BRIGHT CHINA,BUILDING1,BEIJING.
PROFESSIONAL EXPERIENCE
1985-Present LEYNER CORPORATION,Lake Charles,LA
Industrial Engineer
Provide floor support engineering in printed wire assembly (PWA) and subsystem assembly (SSA) areas.
Purchase capital with vendors. Justify expenditures.
Design plant layout fixtures,and flow charts of material.
Program automatic equipment.
Write process sheets and rework procedures.
Recommend changes to product to allow ease of manufacture.
Implement design methods and process improvements.
Troubleshoot disposition or rejection of material.
Provide assistance to all other departments.
1984PRUDENCE D. MCHARRISON LABORATORY,Ruston,LA
Engineering Assistant
Conducted variety of tests including ,and creep tests on molded parts.
Responsible for production of plastic test specimens,and mounting polishing,and microscopic analysis.
Designed tools and fixtures for Instron machine.
1982/83DUCHESS COMPONENTS,Baton Rouge,LA
Molding Room Attendant,1983
Operated and maintained machine producing epoxy preforms.
Maintained records on inventory,loss of material,and quality control.
Machine shop attendant,1982
Operated lathes,milling and grinding machines;monitored welding and heat treatments.
Read blueprints.
EDUCATION
LOYOLA UNIVERSITY AT NEW ORLEANS,College of Engineering,New Orleans,LA
Bachelor of Science Degree in Industrial Technology,1985
Minor concentration in computer science.
PROFESSIONAL AFFILIATIONS/CERTIFICATIONS
Member,Society of Manufacturing Engineers,Leaner Management Club Certified Manufacturing Technologist and Solderer.
NOTICE
Relevant Work experience is emphasized while other positions are de-emphasized.
Chronological format illustrates a clear career path.
工业工程师英文求职信
工业工程师英文求职信要怎么写？如不知怎样写请看看大学生个人简历求职网为您提供的计算机专业求职信为参考，为了让您了解更多相关内容推荐一份毕业生写求职信为写求职信时参照，那么在求职中个人简历与求职信又是怎样设计与写作的呢，请看看这篇人事文员求职信为模板。
INDUSTRIALENGINEER
SandyLin15/F,TOWER2,BRIGHTCHINA,BUILDING1,BEIJING.
PROFESSIONALEXPERIENCE
1985-PresentLEYNERCORPORATION,LakeCharles,LA
IndustrialEngineer
Providefloorsupportengineeringinprintedwireassembly(PWA)andsubsystemassembly(SSA)areas.
Purchasecapitalequipment.Interfacewithvendors.Justifyexpenditures.
Designplantlayoutfixtures,andflowchartsofmaterial.
Programautomaticequipment.
Writeprocesssheetsandreworkprocedures.
Recommendchangestoproducttoalloweaseofmanufacture.
Implementdesignchanges.Inititatemethodsandprocessimprovements.
Troubleshootproblems.Effectdispositionorrejectionofmaterial.
Provideassistancetoallotherdepartments.
1984PRUDENCED.MCHARRISONLABORATORY,Ruston,LA
EngineeringAssistant
ConductedvarietyoftestsincludingTensile.Compression,andcreeptestsonmoldedparts.
Responsibleforproductionofplastictestspecimens,andmountingpolishing,andmicroscopicanalysis.
DesignedtoolsandfixturesforInstronmachine.
1982/83DUCHESSCOMPONENTS,BatonRouge,LA
MoldingRoomAttendant,1983
Operatedandmaintainedmachineproducingepoxypreforms.
Maintainedrecordsoninventory,lossofmaterial,andqualitycontrol.
Machineshopattendant,1982
Operatedlathes,millingandgrindingmachines;monitoredweldingandheattreatments.
Readblueprints.
EDUCATION
LOYOLAUNIVERSITYATNEWORLEANS,CollegeofEngineering,NewOrleans,LA
BachelorofScienceDegreeinIndustrialTechnology,1985
Minorconcentrationincomputerscience.
PROFESSIONALAFFILIATIONS/CERTIFICATIONS
Member,SocietyofManufacturingEngineers,LeanerManagementClubCertifiedManufacturingTechnologistandSolderer.
NOTICE
RelevantWorkexperienceisemphasizedwhileotherpositionsarede-emphasized.
Chronologicalformatillustratesaclearcareerpath.
请继续阅读：计算机专业求职信、应届生求职信、师范毕业生求职信
My name is xx, xx, a college from electronic professional graduates. three years, the teachers teaching, students love and nurture all aspects, so i got a lot of knowledge, know a lot of sense, as a beginner, i have excellent ability to learn and willing to learn, dare to innovate, and constantly strive for excellence; as a participant, i have honest character, full of team spirit; as a leader able to do things i have, resolute style, good communication and interpersonal coordination. have a strong endurance, willpower, and hard-working quality, serious and responsible work, proactive, optimistic personality persistent, dare to face the difficulties and challenges.
In order to better adapt to society in need of, i grasp the premise of the school curriculum to make full use of spare time, read a lot in extra-curricular reading, to broaden their knowledge.
Through professional courses, i now have strong computer skills and professional use of the software. proficient in office, wps software, skilled use of quartus ii, max + plus ii, altium designer 6, altium , protel 99 se software, proficient in verilog hdl, vhdl, c language. computer hardware, i am familiar with principles of its composition, can skillfully assembled by computer to an independent computer to rule out all kinds of trouble.
As a university student about to graduate, i have confidence to meet new challenges, and overcome the challenge of self, i may not the best, but it must be most carefully, and please believe me and give me time to achieve self-value opportunities.
Good morning !It is really my honor to this interview,I hope i can make a good performance today. I'm confident that I can succeed.
Now i will introduce myself .I am 26 years old,born in AnHui province .
I was graduated from AnHui Normal university. My specialty is Electrical and Information.and i got my bachelor [‘bæt??l?] degree after my graduation in the year of .
I spend most of my time on study. and i have acquired basic knowledge of my major during my school time.
In October 2008, I begin work for a company of Tai Wan as a Electrical engineer in Kun Shan city.
My major is as a technical support engineer,for
example ,product test,include handwear tset ,softwear test,and so on. Because I'm capable [keip?bl] of more responsibilities
[risp?ns?biliti], so I decided to change my job.
And in December ,I left the first company to hong bo Electronic Technologies.And in this company ,in this company, my major is about Micro Control Unit , C programe design and relate to handwear design (开关电源 Switching Power Supply). But I want more opportunities for development,so In july at this year ，I come to shanghai. During this period，I attended a training on Micro Control Unit projects. It is Systematic study of the software and hardware design.
PrintedCircuitBoard (PCB)
worked for a foreign enterprise as a automation software test engineer.Because I want to change my working environment, I'd like to find a job which is more challenging. Morover Motorola is a global company, so I feel I can gain the most from working in this kind of company ennvironment. That is the reason why I come here to compete for this position.
I think I'm a good team player and I'm a person of great honesty to others. Also I am able to work under great pressure. That’s all. Thank you for giving me the chance.
Good morning !
It is really my honor to have this opportunity for an interview, I hope I can make a good performance today. I'm confident that I can succeed.
Now I will introduce myself briefly.I am 26 years old,born in shandong province . (General Introduction)
I was graduated from Qingdao university. my major is electronic.and I got my bachelor degree after my graduation in the year of 20__. During university, I spent most of my time on study so that I have passed CET4/6 . and acquired basic knowledge of my major.(Education background)
In July 20__, I began work for a small private company as a technical support engineer in QingDao.Because I'm capable of more responsibilities, so I decided to change my job. And in August 20__,I left QingDao to BeiJing and worked for a foreign enterprise as an automation software test engineer.Because I want to change my working environment, I'd like to find a job which is more challenging. Moreover Motorola is a global company, so I feel I can gain the most from working in this kind of company ennvironment. That is the reason why I come here to compete for this position. (Research experience and academic activity)
I think I'm a good team player and I'm a person of great honesty to others. Also I am able to work under great pressure.
That’s all. Thank you for giving me the chance.
My name is x, 21 years old this year, graduated from x The PLA Information Engineering University majoring in computer science and technology, Core Java has a solid foundation, good programming style; familiar with WEB development mode of JSP+Servlet+JavaBean; familiar with Struts, Hibernate, Spring and other open source frameworks, the solution of EJB; familiar with Tomcat, Jboss server, familiar with the Linux and Unix environment based on the software development.
There are many times during the period of school social practice experience, has been involved in the development of virtual laboratory needs analysis, during the university served as the multi course class representative. Although the actual experience is not enough, but the four years I developed a full confidence and professionalism and solid basic knowledge of discipline and strong professional skills.
Four years of military life, I have strict demands on themselves, consciously, and punctuality. I, honest and responsible, independent and aggressive character, diligent hands, good brains, strong ability to adapt to the new environment. In the shortest time to complete the transition from student to occupation staff, try your best thaw Get into a new job life
Please examiner comments, thank you!
Good morning， ladies and gentlemen!
It is really my honor to have this opportunity for an interview. I hope I can make a good performance today. Im confident that I can succeed. Now I will introduce myself briefly. I am 26 years old， born in Shandong province. I graduated from Qingdao University. My major is electronics.
And I got my bachelor degree after my graduation in the year of 20__. I spent most of my time on study， and I’ve passed CET-6 during my university. And I’ve acquired basic knowledge of my major. It is my long cherished dream to be an engineer and I am eager to get an opportunity to fully play my ability.
In July ， I began working for a small private company as a technical support engineer in Qingdao city. Because there was no more chance for me to give full play to my talent， so I decided to change my job. And in August ， I left for Beijing and worked for a foreign enterprise as an automation software test engineer.
Because I want to change my working environment， Id like to find a job which is more challenging. Moreover，Motorola is a global company， so I feel I can gain a lot from working in this kind of company. That is the reason why I come here to compete for this position. I think Im a good team player and a person of great honesty to others. Also，I am able to work under great pressure. I am confident that I am qualified for the post of engineer in your company.
That’s all. Thank you for giving me the chance.
good morning. it's a pleasure for me to be here in front of you to present myself. my name is x, and i am a candidate for the position of mechanical designer
i have learnt following courses in college - theories of machniacal;material mechanics;hydraulic and pneumatic transmission;theories of mechanics;electrical engineering and so on.have the training experience of shanghai diesel engine factory .proficient at computer applications such as , autocad, ug, solidworks, office.be familiar with mechanical design and machinery machining process.
have three years mechanical design experience and have work experience of using large-scale engineering equipment. take use of these abundance professional knowledge and skills to finish the work, for example: develop machinery and equipment production plan; arrange to transport machinery equipment and hoists them; compile the progress of the preparation schedule and so on.
x-11 - now as mechanical designer x co., ltd,responsible for the project management and project progress.assist business people to understand requirement of client.according to client's requirement to design the mechanical equipments of the tunnel shield machine. solve the problems of processing and installation and debugging in time.compile the operating instruction of the tunnel shield machine.
nothing is invincible,i believe that i can do well anything.thanks
★ 英文自我介绍
